SHARE
Home

Install a Beautiful Laminate Countertop

BY James Dulley TIMENovember 19, 2026

Dear James: My budget is tight, so I plan to remodel my kitchen in steps over time, with the countertop first. What type of countertop looks good and is easy to install myself?—Brandon J.

Dear Brandon: It might sound like a huge project, but installing a new countertop actually is one of the easiest kitchen remodeling projects. It, along with changing cabinet fronts and colors, will have the greatest impact on the appearance and the overall kitchen decor.

You will probably have to head to the local tool rental shop for a few tools such as a long straight edge, clamps, and a roller. These will make the job a lot easier and result in a more professional-looking countertop.

Plastic laminate is the best material to use for your new countertop. It is durable, easy to work with, and reasonably priced. It is basically composed of a substrate with a pattern printed on a thin sheet placed over it. This is encapsulated in a tough, clear plastic to protect the printed sheet.

Very little will damage the laminate surface other than very hot pots or cutting on it without a cutting board. Make sure to instruct your children about this. Water won’t harm it, but you should wipe it off often to remove any abrasive particles which may scratch it over time. With proper care, it can stay beautiful for many years.

Your home center store is the best source for the plastic laminate. It is usually available in 4-by-8-foot sheets, which are large enough for most kitchen countertops. If you need a large piece or desire some fancy or unusual patterns, the home center store can likely special order some from design catalogs for you.

Plastic laminate is a thin material, so it is not very strong without support. To bring it home from the store, have it rolled and tied in a large diameter. Once you have it home, handle it carefully, usually with a helper for support, or you will, unfortunately, find out how brittle it can be when unsupported.

Use a plastic or car body filler to fill any deep gouges in your old countertop. Sand these spots down as smooth as possible so there are no raised areas. Remove the sink and faucet fixtures so they will rest on top of the laminate when reinstalled. Don’t try to cut perfect openings that just fit around the fixtures.

With your helper, unroll the sheet of laminate over the old countertop. Make sure any pattern runs parallel to an edge. Carefully position a long metal straight edge over the laminate and the countertop edge and clamp it.

Using a scoring tool, scribe a mark on the laminate and flex it until it breaks. Work carefully around the corners and use a file to smooth the edges and for final shaping. The corner sections can get brittle, so be gentle.

Brush contact cement on the old countertop and the underside of the laminate. When it is ready, place the laminate on the countertop and use a roller to force it down. Work from the inside out until there are no loose spots. Attach the edge trim, and you are ready to start preparing lunch.

HomeHowTo.1004 copy 2
(Courtesy of James Dulley)
Send your questions to Here's How, 6906 Royalgreen Dr., Cincinnati, OH 45244, or visit Dulley.com. To find out more about James Dulley and read features by other Creators Syndicate writers and cartoonists, visit the Creators Syndicate website at Creators.com. Copyright 2026 Creators.com
You May Also Like